LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1056 (Automatic Transmission - 6L50/6L80/6L90 - DTC P0973 To DTC P2764) >> DTC P1831 or P1832 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clear the DTC and operate the vehicle under the conditions for running and setting the DTC.
  2. Observe the High Side Driver CKT Status parameter. The parameter should display OK.
    • If the parameter displays Open, Short to Ground, Short to Voltage, or the DTC resets, replace the control solenoid (w/body and TCM) valve assembly. Refer to Control Module References for replacement, setup, and programming.
scientia non olet · About LEMON Manuals