Circuit/System Verification
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that DTC P064C is not set.
- If DTC P064C is set, refer to DTC P064C .
- Ignition ON, engine OFF, observe the scan tool Glow Plug 1-Glow Plug 8 parameters. All Glow Plug parameters should closely match each other.
- Refer to Testing for Intermittent Conditions and Poor Connections if you cannot duplicate the conditions.
- Engine running, observe the DTC information with a scan tool. DTCs P0671-P0678 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.