LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1044 (Engine Controls And Fuel - 4.8L, 5.3L, 6.0L, 6.2L, Or 7.0L - DTC P0010 To DTC P0230) >> DTC P0011 >> Typical Scan Tool Data Table >> Notes

Typical Scan Tool Data Table: Notes

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
CMP Command

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine speed greater than 900 RPMs in Park
Parameter Normal Range:  0 - 100%
CMP Command 0% 0% 0%
Desired CMP

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine speed greater than 900 RPMs in Park
Parameter Normal Range:  0 - 31°
Desired CMP 0° 0° 0°
CMP Angle

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine speed greater than 900 RPMs in Park
Parameter Normal Range:  0 - 31°
CMP Angle 0° 0° 0°
CMP Variance

Display Parameters Short to Ground Open/High Resistance Short to Voltage
Operating Conditions:  Engine speed greater than 900 RPMs in Park
Parameter Normal Range:  0°
CMP Variance 0° 0° 0°
scientia non olet · About LEMON Manuals