Static Test: Notes
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
You must perform the Circuit/System Testing first.
Test for 5.9 and 6.9 ohms at 20°C (68°F) between the solenoid control terminal 2 and the low reference terminal 1 at the CMP actuator solenoid.
- If the resistance is not within the specified range, then replace the CMP actuator solenoid. Refer to Camshaft Position Actuator Magnet Replacement .