LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1036 (Engine Exhaust System) >> Repair Instructions >> Exhaust Heat Shield Replacement - Dash Panel >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Left Exhaust Heat Shield & Nuts
    GM707396Courtesy of GENERAL MOTORS CORP.
  1. Install the heat shields (1, 3) through the respective wheelwell.
  2. Install the exhaust heat shield (1, 3) to the dash panel studs.
    NOTE: Refer to Fastener Notice .
  3. Install the exhaust heat shield nuts.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals