LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1035 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Information >> Transmission Fluid Cooler Hose/Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) .
  2. Fig 1: View Of Auxiliary Oil Cooler
    G00405641Courtesy of GENERAL MOTORS CORP.
  3. Remove the transmission fluid cooler hose from the auxiliary oil cooler (2). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  4. Fig 2: View Of Transmission Fluid Cooler Hose
    G00405642Courtesy of GENERAL MOTORS CORP.
  5. Remove the transmission fluid cooler hose from the radiator (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  6. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the engine protection shield. Refer to Engine Shield Replacement .
  8. Fig 3: View Of Oil Cooling Lines & Transmission
    G00405643Courtesy of GENERAL MOTORS CORP.
  9. Remove the cooling lines from the transmission (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  10. Remove the oil cooling lines from the vehicle.