Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Take-Off (PTO) Cover And Gasket

Courtesy of GENERAL MOTORS CORP.

Install the new PTO cover gasket (1) and cover (2).

NOTE: Refer to Fastener Notice .

Start the top-center bolt (3) first. Install the other 5 bolts.
Tighten: Tighten all bolts to 43 N.m (32 lb ft).