LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1035 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Intermediate Carrier Assembly Assemble

Intermediate Carrier Assembly Assemble

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intermediate Carrier Assembly & Output Carrier Internal Gear
    GM1217959Courtesy of GENERAL MOTORS CORP.
  1. Position the output carrier internal gear (3) on the work table so that the outer splines are facing down.
  2. Install the intermediate carrier assembly (2) into the output carrier internal gear (3). Make sure the splines are engaged.
  3. Install the retaining ring (1) into the output carrier internal gear (3) so that the intermediate carrier assembly is retained.
scientia non olet · About LEMON Manuals