Input Sun Gear Thrust Washer Inspection

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Measuring Thickness Of Input Sun Gear Thrust Washer

Courtesy of GENERAL MOTORS CORP.

Measure the thickness of the 1-2-3-4, 4-5-6 clutch thrust washer (1) at dimension A.
Specification: The thrust washer minimum thickness is 2.59 mm (0.102 in).
Replace the thrust washer if the specifications are not met.