LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1035 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Information >> Input Carrier Removal

Input Carrier Removal

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Carrier & Thrust Bearing Assembly
    GM1216947Courtesy of GENERAL MOTORS CORP.
  1. Remove the input carrier assembly (2).
    2. IMPORTANT: The thrust bearing assembly may stick to the input carrier assembly or the intermediate carrier assembly.
  2. Remove thrust bearing assembly (1) from input carrier assembly (2) or intermediate carrier assembly.
scientia non olet · About LEMON Manuals