Special Tools

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	DT-48021 Seal Installer
Courtesy of GENERAL MOTORS CORP.	DT-48022 Output Bushing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48209 Bushing Remover
Courtesy of GENERAL MOTORS CORP.	DT-48211 Drive Sprocket Bearing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48212 Input Shaft Pilot Bearing Installer
Courtesy of GENERAL MOTORS CORP.	DT-48734 Extension Housing Bushing Replacer
Courtesy of GENERAL MOTORS CORP.	J 2619-O1 Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 35512 Inner Pinion Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture