Shift Fork Assemblies, Drive Chain, and Rear Output Shaft Assembly Removal
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Shift Fork Assemblies, Drive Chain, and Rear Output Shaft Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Rear Output Shaft Assembly Tip: Mount the assembly into a soft-jaw vice or holding fixture for disassembly. |
| 2 | Transfer Case Two/Four Wheel Drive Shift Fork Assembly |
| 3 | Transfer Case High/Low Shift Fork Assembly |
| 4 | Transfer Case High/Low Clutch |
| 5 | Transfer Case Front Output Shaft Drive Chain Assembly |