Circuit/System Description
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The transfer case control module commands shifts through motor A and motor B control circuits causing the transfer actuator to shift the transfer case to different modes or ranges depending on driver selection. The transfer case control module monitors actuator current and incremental sensor output in order to shift the transfer case and verify that the proper position has been obtained. Deviations in current and position from expected values will cause this DTC to set.