LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1019 (Wheel Drive Shafts) >> Diagnostic Information and Procedures >> Click Noise In Turns

Click Noise In Turns

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Step Action Yes No
DEFINITION: Clicking noise while turning in drive under load.
1 Check for worn or damaged outer CV joints.
Are the outer CV joints/seals worn?
Go to Step 2  System OK
2 Replace the outer CV joints/seals. Refer to Wheel Drive Shaft Outer Joint and Boot Replacement .
Is the repair complete?
System OK -