Removal Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Place drain pans under the vehicle as needed.
- Disconnect the power steering fluid cooler hose clamp and hose (3) from the steering gear (2).
- Remove the power steering gear outlet pipe (1) from the steering gear (2).
NOTE:
Refer to Power Steering Hose Disconnected Notice
.