Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle): Notes
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 8614-01 Flange/Pulley Holding Tool
- J 22388 Rear Axle Pinion Oil Seal Installer - Rear (8. See Special Tools .6 inch, 9.5 inch axle)
- J 44414 Rear Axle Pinion Oil Seal Installer (10. See Special Tools .5 inch, 11.5 inch axle)