Drive Pinion Bearings Replacement (8.6, 9.5, 11.5 Inch Axle): Notes

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 7818 Inner Bearing Race Installer. See Special Tools .
J 8092 Universal Driver Handle - 3/4 in - 10
J 8611-01 Rear Pinion Bearing Race Installer. See Special Tools .
J 8614-01 Flange and Pulley Holding Tool
J 22306 Pinion Cup Bearing Installer - Rear. See Special Tools .
J 22912-B Split Plate Bearing Puller
J 22828 Input/Counterbalance Race Installer
DT-47688 Pinion Bearing Remover, 8. See Special Tools .6 Inch Axle Installer
J 36614 Inner Pinion Bearing Installer
J 45870 Pinion Bearing Cup Installer. See Special Tools .