Circuit/System Testing
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the adjustable pedal switch connector.
- Ignition ON, verify that both adjustable pedal switch parameters to the memory seat module are Inactive.
- If one of the switch parameters is always Active test the affected switch signal circuit for a short to voltage. If the signal circuit tests normal replace the memory seat module.
- If the circuit tests normal replace the adjustable pedal switch.