LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (3 Of 4) >> Off-Vehicle Repair Instructions (Part 2) >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

  1. Remove the oil level indicator from the tube.
    Fig 1: View Of Oil Level Indicator & Tube
    GM260114Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil level indicator tube bolt.
  3. Remove the oil level indicator tube from the engine block.
    4. IMPORTANT: Inspect the O-ring seal for cuts or damage. The O-ring seal may be used again if it is not cut or damaged.
  4. Remove the O-ring seal from the tube, if required.
scientia non olet · About LEMON Manuals