LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (2 Of 4) >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement (6.0L (RPO LQ9)) >> Removal Procedure

Removal Procedure

  1. Loosen the intake manifold sight shield bolt.
  2. Remove the sight shield from the sight shield retainer.
  3. Loosen the left fuel rail cover bolts.
    4. Fig 1: View Of Fuel Rail Covers & Intake Manifold Sight Shield (6.0L W/RPOs Y91 & Z88)
    GM832097Courtesy of GENERAL MOTORS CORP.
  4. Remove the left fuel rail cover.
  5. Remove the surge tank/heater hoses from the clip on the right fuel rail cover.
  6. Loosen the right fuel rail cover bolts.
  7. Remove the right fuel rail cover.
  8. Remove the sight shield retainer bolts and retainer, if required.
    Fig 2: View Of Sight Shield Retainer (4.8L, 5.3L & 6.0L)
    GM832095Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals