LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (2 Of 4) >> On-Vehicle Repair Instructions >> Engine Mount Bracket Replacement - Left >> Installation Procedure

Installation Procedure

  1. Install the engine mount bracket.
    Fig 1: View Of Left Engine Mount Bracket & Bolts
    GM678843Courtesy of GENERAL MOTORS CORP.
  2. Perform the following procedure prior to installing the engine mount bracket bolts.
    • Remove all traces of the original adhesive patch.
    • Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
    • Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the engine mount bracket bolts.

    Tighten:  Tighten the engine mount bracket bolts to 75 N.m (55 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement - Left .
scientia non olet · About LEMON Manuals