LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (2 Of 4) >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

  1. Loosen the drive belt idler pulley bolt.
  2. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory (4.8L, 5.3L, and 6.0L Engines)  or Drive Belt Replacement - Accessory (5.3L Engine w/RPO HP2) .
    3. Fig 1: View Of Drive Belt Idler Pulley (5.3L Engine W/RPO HP2)
    GM1195696Courtesy of GENERAL MOTORS CORP.
  3. Remove the drive belt idler pulley and bolt.
scientia non olet · About LEMON Manuals