LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> ENGINE MECHANICAL - 4.8L, 5.3L, AND 6.0L (2 Of 4) >> On-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

  1. Remove the torque converter locator bushing. Refer to Torque Converter Locator Bushing Replacement (5.3L Engine w/RPO HP2) .
  2. Remove the crankshaft rear oil seal (1) from the rear cover.
    Fig 1: View Of Crankshaft Rear Oil Seal
    GM490692Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals