LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Switch Replacement - Hot and Cold Cupholder >> Removal Procedure

Removal Procedure

  1. Remove the cupholder assembly. Refer to Cupholder Replacement (Luxury) , Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Pro) .
    2. IMPORTANT: Observe the orientation of the switches. The red lights point towards the rear of the vehicle.
    Fig 1: Hot & Cold Cupholder Switches
    GM824844Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the wire connectors from the 2 switches.
    • Switch 1 is the power switch.
    • Switch 2 is the hot and cold switch.
    3. Fig 2: Hot & Cold Cupholder Switch Retaining Tabs
    GM824839Courtesy of GENERAL MOTORS CORP.
  3. Remove the defective switch by pushing in the retaining tabs (1) while pushing the switch outwards.
scientia non olet · About LEMON Manuals