LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the I/P cluster trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
    Fig 1: Removing End Panel
    GM348724Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
    Fig 2: Knee Bolster & Bolts
    GM348714Courtesy of GENERAL MOTORS CORP.
  3. Unsnap the top of the knee bolster from the I/P assembly.
scientia non olet · About LEMON Manuals