LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Cupholder Replacement (Pro) >> Installation Procedure

Installation Procedure

  1. Install the beverage-mate to the cupholder.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining screws.

    Tighten:  Tighten the retaining screws to 1.6 N.m (14 lb in).

  3. Install the switches to the cupholder assembly. Refer to Switch Replacement - Hot and Cold Cupholder .
    4. Fig 1: Cupholder (Pro)
    GM824846Courtesy of GENERAL MOTORS CORP.
  4. Connect the wire connectors to the switches.
  5. Install the cupholder assembly to the console by pressing downwards until fully seated.
scientia non olet · About LEMON Manuals