LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Storage Bin Replacement (Pro) >> Installation Procedure

Installation Procedure

  1. Place the console bin and lid assembly over the console in order to route the electrical cord to the console bin.
  2. Install the console bin and lid assembly to the console.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    3. IMPORTANT: Ensure the rear bolts has the bigger washer.
    Fig 1: Installing Console Storage Bin Bolts (Pro)
    GM824838Courtesy of GENERAL MOTORS CORP.
  3. Install the 4 console bin retaining bolts (1).

    Tighten:  Tighten the 4 bolts to 3.5 N.m (35 lb in).

    4. IMPORTANT: Ensure the longer screw is installed in the front of the console bin.
    Fig 2: Installing Console Storage Bin Lid Screws (Pro)
    GM824843Courtesy of GENERAL MOTORS CORP.
  4. Install the 6 retaining screws (1).

    Tighten:  Tighten the 6 screws to 1.6 N.m (14 lb in).

scientia non olet · About LEMON Manuals