LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L80-E/4L85-E - Overhaul >> Repair Instructions >> Intermediate Clutch Assembly Installation

Intermediate Clutch Assembly Installation

  1. Dip all of the intermediate clutch plates in DEXRON®VI transmission fluid.
  2. Install the intermediate clutch wave plate (684) with the tangs facing down.
    Fig 1: View Of Intermediate Clutch Plates
    GM334809Courtesy of GENERAL MOTORS CORP.
    3. IMPORTANT: Alternate the clutch plates, starting with the steel clutch plate (4 steel and 4 composite).
  3. Install the intermediate clutch plates (631, 632).
  4. Install the intermediate clutch backing plate (630).
  5. Install the intermediate clutch backing plate retainer ring (629). The opening of the retainer ring (629) should be at the 9 o'clock position.
    Fig 2: Aligning Intermediate Clutch Backing Plate Retainer Ring At 9:00 Position
    GM334811Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals