Conditions for Running
WARNING: This page is about a different variant/trim than selected.
DTC P0601
- The ignition switch is in the Run or Crank position.
- DTC P0601 runs continuously when the above condition is met.
DTC P0602
- The ignition switch is in the ON position.
- DTC P0602 runs continuously when the above condition is met.
DTC P0604
- The ignition switch is in the Run or Crank position.
- DTC P0604 runs continuously when the above condition is met.
DTC P2610
- The PCM is powered down.
- DTC P2610 runs once every time the key is turned OFF.