Transmission Extension Disassemble

WARNING: This page is about a different variant/trim than selected.

For the C model, using a hammer and a suitable punch, remove the mainshaft seal from the transmission extension.

Fig 1: Removing Mainshaft Seal (C Models)
Courtesy of GENERAL MOTORS CORP.
For the C model, remove the mainshaft rear bearing retainer ring.

Fig 2: Removing Mainshaft Rear Bearing Retainer Ring (C Models)
Courtesy of GENERAL MOTORS CORP.
For the C model, using a hammer and a suitable punch, remove the rear bearing. Do not reuse the bearing after removal.

Fig 3: Removing Rear Bearing (C Models)
Courtesy of GENERAL MOTORS CORP.