Transmission Extension Assemble

Tools Required

• J 8092  Universal Driver Handle
• J 22834-A  Extension Housing Seal Installer. See Special Tools .
• J 38807  Extension Housing Bearing Installer. See Special Tools .

1. For the C model, using the J 38807  (1) and the J 8092  (2), install the rear output shaft rear bearing in the transmission extension.
   Fig 1: Installing Rear Output Shaft Rear Bearing (C Model)

   Courtesy of GENERAL MOTORS CORP.
2. For the C model, install the mainshaft rear bearing retainer ring.
   Fig 2: Installing Mainshaft Rear Bearing Retainer Ring (C Model)

   Courtesy of GENERAL MOTORS CORP.
3. For C model, install a new mainshaft seal using the J 22834-A  in the transmission extension. See Special Tools .
   Fig 3: Installing New Rear Oil Seal (C Model)

   Courtesy of GENERAL MOTORS CORP.