Valve Rocker Arm Cover Installation - Lower Right

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: The gasket may be reused if it is not torn, cracked, stretched, or swollen.

Fig 1: View Of Lower Valve Rocker Arm Cover (Right)

GM1335929

Courtesy of GENERAL MOTORS CORP.

Install the lower valve rocker arm cover.

NOTE: Refer to FASTENER NOTICE .

Install the lower valve rocker arm cover bolts.
Tighten:
- Tighten the lower valve rocker arm cover bolts in the proper sequence to 10 N.m (89 lb in).
  
  Fig 2: Identifying Lower Valve Rocker Arm Cover Bolt Tightening Sequence
  Courtesy of GENERAL MOTORS CORP.
- Retighten the lower valve rocker arm cover bolts in the proper sequence to the same torque, 10 N.m (89 lb in).