LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Engine Mechanical - 6.6L - Off Vehicle Repair Instructions (3 Of 3)) >> Off-Vehicle Repair INSTRUCTIONST (Part 3) >> Intake Manifold Crossover Installation

Intake Manifold Crossover Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the intake manifold crossover gaskets.
  2. Install the intake manifold crossover.
    Fig 1: View Of Center Intake Manifold
    GM1335931Courtesy of GENERAL MOTORS CORP.
    3. NOTE: Refer to FASTENER NOTICE .
  3. Install the intake manifold crossover nuts and bolts in sequence.

    Tighten:  Tighten the intake manifold crossover nuts and bolts to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals