Circuit/System Description

The engine control module (ECM) supplies voltage to each fuel injector on the injector positive voltage control circuits. The ECM energizes each fuel injector by grounding the control circuit of that fuel injector. The ECM monitors the status of the injector positive voltage control circuits and the fuel injector control circuits. The injectors are separated into the following four groups:

• Group 1-DTC P2146 with injectors 1 and 4
• Group 2-DTC P2149 with injectors 6 and 7
• Group 3-DTC P2152 with injectors 2 and 5
• Group 4-DTC P2155 with injectors 3 and 8

When a fuel injector circuit condition is detected by the ECM, the affected fuel injectors will be disabled and may disable the affected group of fuel injectors.