Tools Required
WARNING: This page is about a different variant/trim than selected.
J 21366 Converter Holding Strap. See Special Tools .
CAUTION:
To reduce the risk of severe shock and burns, always treat the 3-phase cable and connectors as if voltage is present and as if the surface of all parts of the cable is hot.
CAUTION:
To reduce the risk of severe shock and burns, always disconnect the 42 volt (42V) energy storage box (ESB) before doing any work to the ESB system. To disconnect the ESB, turn the engine off and turn OFF the service disconnect switch, which is located on the passenger side of the ESB.