LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Wiper System & Washer System) >> Repair Instructions >> Windshield Washer Solvent Level Switch Replacement (GMC)

Windshield Washer Solvent Level Switch Replacement (GMC)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Windshield Washer Solvent Level Switch (GMC)
GM1839448Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the windshield washer container. Refer to Windshield Washer Solvent Container Replacement .
  2. Using two flat-bladed tools placed under the edges of the level indicator pry outward to release the level sensor from the washer container.
  3. Discard the level indicator grommet.
1 Windshield Washer Solvent Level Indicator
Tip:  Ensure the square edge of the level indicator faces upward upon installation.