Drivetrain and Front Suspension Frame Front Crossmember Replacement (1500, 2500 LD)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Drivetrain and Front Suspension Frame Front Crossmember (1500, 2500 LD)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the oil pan skid plate. Refer to Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) .
1	Engine Front Crossmember Nut (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 50 N.m (37 lb ft) plus 120 degrees
2	Engine Front Crossmember Bolt (Qty: 4) Procedure Remove all traces of the original adhesive patch. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488).
3	Lower Control Arm Crossmember