LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 992 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Upper Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The windshield upper reveal molding requires removal of the windshield for proper installation.
    Fig 1: Identifying Upper Reveal Molding from Windshield
    GM105242Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield. Refer to Windshield Replacement .
  2. Remove the upper reveal molding (1) from the windshield (2) starting at the center and working outboard to both ends.
scientia non olet · About LEMON Manuals