LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (Battery, Charging System And Starting System) >> Repair Instructions >> Engine Ground Strap Replacement (6.6L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ground Strap & Nut
    GM1873891Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap (2) to the vehicle and the stud on the plenum front panel.
  2. Install the ground strap nut (1) to the stud on the plenum front panel.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

    3. Fig 2: View Of Engine Ground Strap & Bolt
    GM1873892Courtesy of GENERAL MOTORS CORP.
  3. Position the ground strap (1) to the cylinder head.
  4. Install the ground strap bolt (2) to the cylinder head.

    Tighten:  Tighten the bolt to 16 N.m (12 lb ft).

scientia non olet · About LEMON Manuals