LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 985 (Instrument Panel System Displays & Gages) >> Diagnostic Information and Procedures >> Driver Information Center (DIC) Switch Malfunction >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The driver information switches are normally open momentary switches. Power is provided to the driver information center (DIC) switches via the instrument panel cluster (IPC). The IPC interfaces with the DIC switches via 3 discreet circuits. The switch input to the cluster is pulled low or grounded when a switch is activated. The IPC reads the voltage at the analog input to determine which switch(es) is pressed. The switch input to the cluster is set up in a resistor ladder format for three of the four switches. The DIC switches include the PERSONALIZATION, SET/RESET, TRIP/FUEL, AND VEHICLE INFO switches. A stuck switch or a short to battery sets a DTC.

scientia non olet · About LEMON Manuals