Removal Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel to the service position. Refer to Instrument Panel Service Positioning (Without SLT) or Instrument Panel Service Positioning (With SLT) .
- If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.
- If equipped remove the HVAC module assembly screws.
- Separate the HVAC module assembly.
- Remove the mode actuator screws.
- Remove the mode actuator.
- Remove the mode actuator cam assembly.
- Remove the defroster door (8).