LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 981 (Lighting Systems) >> Repair Instructions >> Rear License Lamp Replacement (Silverado) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of License Lamp (W/ Step Bumper)
    GM348708Courtesy of GENERAL MOTORS CORP.
  1. Ensure the headlamp switch is in the OFF position.
  2. Reach under the rear bumper and press on the lens end of the cover in order to release the locking tab.
  3. Remove the lens housing from the bumper assembly.
  4. Remove the bulb.