Circuit/System Description
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Voltage is applied at all times to the high beam headlamp relay from battery voltage. When the multifunction switch is placed in either the FTP or HIGH position, ground is applied to the body control module (BCM). The BCM then applies a ground to the headlamp high beam relay control circuit. This engages the relay and applies voltage through the HI HEADLAMP fuses to both left and right high beam headlamps.