Instrument Panel Driver Knee Bolster Deflector Replacement (with RPO SLT)
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the knee bolster. Refer to Knee Bolster Replacement (with RPO SLT) . |
|
| 1 | Knee Bolster Deflector Nuts (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 2 | Knee Bolster Deflector |