LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Lower Oil Pan Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

J 37228  Seal Cutter. See Special Tools .

    Fig 1: View Of Oil Level Sensor Electrical Connector
    GM1334843Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the oil level sensor.
  2. Fig 2: View Of Lower Oil Pan & Bolts/Nuts
    GM1334845Courtesy of GENERAL MOTORS CORP.
  3. Remove the lower oil pan bolts.
  4. IMPORTANT: Do not damage the sealing surfaces when separating the lower oil pan from the upper oil pan.
  5. Separate the lower oil pan from the upper oil pan using J 37228  . See Special Tools .
  6. Remove the lower oil pan.