Tools Required

J-46594  Fuel Injector Remover

Fig 1: View Of Left Fuel Injector Bracket Bolts
Courtesy of GENERAL MOTORS CORP.
1. Remove the left fuel injector bracket bolts.
Fig 2: View Of Right Fuel Injector Bracket Bolts
Courtesy of GENERAL MOTORS CORP.
2. Remove the right fuel injector bracket bolts.
Fig 3: View Of Left Fuel Injectors W/Brackets
Courtesy of GENERAL MOTORS CORP.
3. Install the J-46594  into the fuel injector brackets.
4. Pull back on J-46594  in one steady motion, until the fuel injector breaks free from its seat.
5. Remove the J-46594  .
6. Remove the left fuel injectors with brackets.
Fig 4: View Of Right Fuel Injectors W/Brackets
Courtesy of GENERAL MOTORS CORP.
7. Remove the right fuel injectors with brackets.
Fig 5: View Of Left Injector Bracket Pins
Courtesy of GENERAL MOTORS CORP.
8. Remove the left injector bracket pins.
Fig 6: Identifying Fuel Injector Copper Washers
Courtesy of GENERAL MOTORS CORP.
9. Remove the right injector bracket pins.
10. Remove the copper washer from the injector bore and discard.
11. Remove the O-ring from the injector and discard.