Engine Mounting to Stand

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mounting Engine Block To Suitable Engine Stand

Courtesy of GENERAL MOTORS CORP.

CAUTION: Do not mount the engine to a engine stand by the flywheel housing. The aluminum flywheel housing is not designed to support the weight of the engine when mounted to a typical rear-mount engine stand. Mounting the engine stand to the aluminum flywheel housing may result in engine damage and serious personal injury.

After the flywheel housing has been removed, mount the engine block to a suitable engine stand.