Timing Chain and Sprocket Replacement (LY6, L76 and L92): Notes

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

EN 46330 Timing Chain Tensioner Retaining Pin. See Special Tools .
J 8433 Puller Bar. See Special Tools .
J 41478 Crankshaft Front Oil Seal Installer. See Special Tools .
J 41558 Crankshaft Sprocket Remover. See Special Tools .
J 41665 Crankshaft Balancer and Sprocket Installer. See Special Tools .
J 41816-2 Crankshaft End Protector. See Special Tools .
J 42386-A Flywheel Holding Tool. See Special Tools .
J 45059 Angle Meter