LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Engine Mechanical - 4.8L, 5.3L, 6.0L And 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Front Cover Removal (RPO LY2/LH6/LMG/LY5/LC9)

Engine Front Cover Removal (RPO LY2/LH6/LMG/LY5/LC9)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Cover & Gasket
    GM1704624Courtesy of GENERAL MOTORS CORP.
  1. Remove the front cover bolts (1).
  2. Remove the front cover (2) and gasket (3).
  3. Discard the front cover gasket.
    4. Fig 2: View Of Front Cover, Oil Seal, Camshaft Position Sensor, Bracket & O Ring
    GM1704625Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil seal (4).
  5. Remove the bolts (1, 6), camshaft position (CMP) sensor (2), and wire harness (5).
  6. Remove the O-ring (3) from the sensor, as required.
scientia non olet · About LEMON Manuals