1-2-3-4 and 4-5-6 Clutch Housing Reluctor Wheel Replacement: Notes

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 43767 Tone Wheel Staker. See Special Tools .
J 43768 Tone Wheel Driver. See Special Tools .

Removal Procedure

Fig 1: Identifying Stakes On 1-2-3-4, 4-5-6 Clutch Housing

Courtesy of GENERAL MOTORS CORP.

Grind the stakes from the 1-2-3-4, 4-5-6 clutch housing (1).

Fig 2: Removing 1-2-3-4, 4-5-6 Clutch Housing Tone Wheel

Courtesy of GENERAL MOTORS CORP.

Position the 1-2-3-4, 4-5-6 clutch housing (2) on a press so that the front of the housing is down.
Install J 43768 (1) onto the tone wheel (3). See Special Tools .
Using J 43768 (1), press the tone wheel (3) from the 1-2-3-4, 4-5-6 clutch housing (2). See Special Tools .